Formax 6900 Series User Manual

Page 12

11/40

Fig. 16

5.4.3

Selecting a job

After pressing key 2 in the "main menu", the display shows

the "select job" menu (see Fig. 16). The "select job" menu

shows the following functions:
• job data (key 1).

• select a higher job number (key 3).

• select a lower job number (key 4).

• confirm with "OK" (key 6) which will get you back to the

"main menu".

Only programmed jobs can be selected (maximum of 9

jobs).

Fig. 17

5.4.4

5.4.4 Test run menu

Test run menu

After pressing key 3 in the "main menu" a test run screen will

be displayed. In case an FO-2A is used the screen as

shown in fig. 17 will appear. The purpose of the test run

menu is to check proper envelope feed and to make

adjustments to the envelope stop settings.
The "test run" menu shows the following functions:
• feed one envelope (key 2).

• insert one document (key 3).

• envelope stop position to the right (key 4).

• envelope stop position to the left (key 5).

• confirm settings and return to the main menu (key 6).

In case an FO-3 is used, a screen as shown in fig. 18 will be

displayed. The envelope position keys 4 and 5 of figure 17

have moved to a new submenu (see fig. 18, key 4): after

pressing key 4 this submenu will be entered and the

possibility of adjusting the envelope stop position to the left

or right is available again.

After pressing key 5 a submenu will be entered for fine

tuning the folder settings. For more information see "Fine

tuning the folder settings".
In case the inserter is equipped with a second envelope

hopper (EF-3) the test run menu has been extended and the

following functions for key 1 and 2 have become available

(see fig. 18 for an example):
• feed one envelope from the standard hopper (key 1).

• feed one envelope from the second hopper EF-3 (key 2).

Key

4
5
6

Key

4
5
6