Formax 6900 Series - Manual (Page 28)

27/40 27/40 27/40 27/40
Fig. 34
7.2.4 7.2.4 7.2.4 7.2.4 Removing documents from the hopper Removing documents from the hopper Removing documents from the hopper Removing documents from the hopper
When an error occurs in the hopper the error screen shows
the following symbol:
stoppage in the hopper.
The envelopes can be removed in the following way:
• remove all envelopes from the hopper.
• open the hopper by pulling release handle A of the
hopper upwards (see Fig. 33 and Fig. 34).
• remove the envelopes from the lower part of the hopper.
• close the hopper with a firm click.
• press the reset key.
7.2.5 7.2.5 7.2.5 7.2.5 Removing envelopes from the insert or Removing envelopes from the insert or Removing envelopes from the insert or Removing envelopes from the insert or
sealing table
sealing table sealing table sealing table
When an error occurs in the inner part of the machine, the
error screen can show the following symbols:
stoppage on the insert table.
stoppage on the sealing table.
stoppage in the envelope track.
7.2.6 7.2.6 7.2.6 7.2.6 Stoppage on the insert table or sealing table Stoppage on the insert table or sealing table Stoppage on the insert table or sealing table Stoppage on the insert table or sealing table
Remove envelopes in the following way:
• lift the loc by pulling the release handle A of the loc (see
Fig. 32).
• remove the envelope.
• close the loc.
• press the reset key.