Formax 6900 Series - Manual (Page 3)

2/40 2/40 2/40
Before using this system thoroughly read the operating
instructions. In the European Union an operator manual
printed in the national language(s) is supplied with the
system. If it is not, contact your authorized distributor.
Warnings Warnings Warnings Warnings
• Before connecting check whether the system is suitable for
the local mains voltage; refer to the type plate. The mains
plug shall be connected only to a socket outlet provided
with a protective earth contact.
• The socket outlet shall be installed near the equipment
and shall be easily accessible.
• The following part is considered the equipment
disconnect device: power supply cord plug.
Safety precautions Safety precautions Safety precautions Safety precautions
• This system is only to be operated by fully trained
personnel. The manufacturer accepts no responsibility for
injuries caused by unauthorized operation.
• The opening of covers (except the top and side cover)
must be carried out only by a skilled and authorized
person who is aware of the hazard involved. The system
will not operate with the covers opened.
• Keep long hair, fingers, jewelry, etc. away from turning
parts of the system.
Used symbols Used symbols Used symbols Used symbols
In this manual the following symbols are used.
Warning, this symbol indicates a wrong action
which can cause a hazard to health or
damage the system.
Warning, this symbol indicates a hazard to life
because of high voltage.
Additional information (Italic) NOTE
CONTENTS CONTENTS CONTENTS CONTENTS
Section Section Section Section Page Page Page Page
1. 1. 1. 1. GENERAL GENERAL GENERAL GENERAL 1 1 1 1
2. 2. 2. 2. HOW TO USE THE OPERATOR MANUALS HOW TO USE THE OPERATOR MANUALS HOW TO USE THE OPERATOR MANUALS HOW TO USE THE OPERATOR MANUALS 3333
3. 3. 3. 3. ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES 3333
4. 4. 4. 4. UNDERSTANDING THE MACHINE UNDERSTANDING THE MACHINE UNDERSTANDING THE MACHINE UNDERSTANDING THE MACHINE 4444
4.1 Function 4
4.2 Overview 4
4.3 User interface 4
4.4 Operating controls 5
4.5 Power inlet 5
4.6 Display keys 6
5. 5. 5. 5. OPERATING THE SYSTEM OPERATING THE SYSTEM OPERATING THE SYSTEM OPERATING THE SYSTEM 6666
5.1 Preparations inserter module 6
5.2 Switching on 7
5.3 Entering the personal pin code 7
5.4 The main menu 7
5.4.1 Job info screen overview 8
5.4.2 Schematic view 10
5.4.3 Selecting a job 11
5.4.4 Test run menu 11
5.4.5 Counters menu 14
5.4.6 Settings menu 14
5.5 Entry to job menu 15
5.6 Operator menu structure 16
5.7 Envelope hopper adjustment 17
5.7.1 Side guides adjustment hopper A 17
5.7.2 Envelope separation hopper A 17
5.7.3 Side guides hopper B 18
5.7.4 Envelope separation hopper B 18
6. 6. 6. 6. PERFORMING A JOB PERFORMING A JOB PERFORMING A JOB PERFORMING A JOB 19 19 19 19
6.1 Setting up the system 19
6.2 Running a job 22
6.3 Changing settings of a module 23
6.4 Additional functions 23
Section Section Section Section Page Page Page Page
7. 7. 7. 7. FAULT FINDING FAULT FINDING FAULT FINDING FAULT FINDING 24 24 24 24
7.1 General 24
7.1.1 The error screen 24
7.1.2 The information screen 25
7.1.3 The warning screen 25
7.1.4 The call screen 26
7.2 Clearing stoppages 26
7.2.1 Removing documents 26
7.2.2 Stoppage in the document end feed 26
7.2.3 Stoppage at the document feed 26
7.2.4 Removing documents from the hopper 27
7.2.5 Removing envelopes from the insert or sealing table 27
7.2.6 Stoppage on the insert table or sealing table 27
7.2.7 Stoppage in the envelope track 28
8. 8. 8. 8. ERROR CODES ERROR CODES ERROR CODES ERROR CODES 29 29 29 29
8.1 General 29
8.2 Additions to the error lists of other modules 30
9. 9. 9. 9. MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE 31 31 31 31
9.1 General 31
9.2 General cleaning 31
9.3 Cleaning the brushes 31
9.4 Cleaning the sealing roller 31
9.5 Cleaning the moistening cloth 31
10. 10. 10. 10. OPTIONS OPTIONS OPTIONS OPTIONS 32 32 32 32
10.1 General 32
10.2 More options 32
10.3 69 0 Options 35
11. 11. 11. 11. SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS 38 38 38 38