5 insert specifications, Insert specifications – Formax 6302 Series User Manual
Page 52
50
10.5 Insert specifications
Remarks:
• The specification of the paper handling equipment is often wider than that of the
envelopes and documents handled. The condition of material handled will limit the
specified environmental conditions.
• We recommend that materials to be handled are stored at a temperature of 68°F (20°C)
with a relative humidity factor of 50%. If difference in temperature occurs between
store room and mailing area, the material must be stored near the machine at least 24
hours before use.
• Self-copying paper may cause rubber parts to wear quicker. The rubber used in this
machine has the best resistance to Wiggins Teape material.
A
B
C
D
E
F
G
Minimum size
mm
160
90
32
10
130
84
60 g/
m
2
inches 6.3
3.5
1.25
0.4
5.1
3.3
60 g/
m
2
Maximum size* mm
248
162
B-32
35
A-12**
B-6
2.5***
inches 9.7
6.38
B-1.25 1.4
A-0.47** B-0.2
0.1
* Maximum insert specifications are based on single sheets. When multiples are
handled, more room inside the envelope is needed depending on the application.
** When insert is more than .04" (1 mm): A-15 mm / A-0.6 inch
*** Booklets up to approximately .04" (1 mm) thickness, depending on stiffness