Formax 6302 Series - Manual (Page 48)

46
Flap is wrinkled
and sometimes
not opened Envelope not within
specifications Check specifications
and change
envelopes if needed “Technical
specifications” on
page 48
Envelope specifications
Flap sticks Store envelopes
according to
specifications Envelope specifications
Flap curled Envelopes stored or
manufactured
improperly Envelope specifications
Separation set too
narrow Check separation
settings, adjust if
needed “Loading Envelopes” on
page 13
Fingers are placed
on top of the
envelope Fingers adjusted too
deep into the
envelope Check finger
position, adjust if
needed “Insert Position” on
page 15
Envelope stops too
early Check envelope stop
position, adjust if
needed “Insert Position” on
page 15
Machine stops
while inserting
(jam at the
inserting point) Fingers not correctly
adjusted Check finger
position, adjust if
needed “Insert Position” on
page 15
Inserted document
too long for envelope Check fold settings “Document Settings” on
page 24
Envelope throat
incorrect Check envelope
specifications Envelope specifications
“Technical
specifications” on
page 48
Envelope glued inside Eliminate faulty
envelopes
-
Window not glued
properly Eliminate faulty
envelopes -
Symptom Possible cause Remedy Refer to section