Formax 6302 Series - Manual (Page 26)

24
Envelope Settings
Use this screen to enter the properties of the
envelopes to be used.
At the top of the screen, three selection buttons are
displayed, from which one can be selected. The
selected settings button will be highlighted yellow.
• Press to select an envelope which is fed
into the machine with a closed flap.
• Press to select an envelope which is fed
into the machine with an opened flap.
• Press to set the job without inserting the documents in envelopes (no envelope
mode). This can be useful for jobs where documents only have to be sorted and/or
folded.
• Press to enter the dimensions of the envelope and/or the envelope flap.
A numeric keypad will be displayed to enter the applicable dimensions.
It is also possible to select ISO standard envelopes or dimensions in inches (depending
on the installation settings).
• Press to confirm changed settings or press to return to the previous
screen without changing settings.
Document Settings
Use this screen to set the document formats
and the number of documents to be pulled
from the different feeders.
• Press to set the number of sheets for the
different feeders.
- Press to select a feeder. The selected
feeder will be highlighted.
- Press or to enter the number of
sheets that must be pulled from the
highlighted feeder.
When the number of documents is 0, the relevant feeder will be de-selected.
JOB 8
C6/5
ESCAPE OK
50
ENVELOPE SETTINGS
OK ESCAPE
JOB 8
ESCAPE OK
1
2
3
1
1
1
DOCUMENT SETTINGS