Formax 6302 Series - Manual (Page 12)

10
Slide and Envelope Catch Tray
1. Attach the slide as shown in the figure.
2. Position the envelope catch tray into the holes
underneath the envelope hopper as shown in the
figure.
The distance A should be approximately 1.5 x
the envelope height.
3.3 Starting Up
1. Connect the machine to the main power
supply.
2. Use the power switch to switch the machine ON.
The software will ask you to select the required
language.
3. Select the required language for the display.
4. The software will ask you if you want the “select
language option” to be displayed every time the
machine is switched on. Select either Yes or
No.
5. Press .
The Main Menu screen 1/2 will be displayed.
A
Test run
other job
JOB 1
Counters
AutoSet
Total:
0
MAIN MENU 1/2
OK