Formax 6302 Series - Manual (Page 27)

25
ENGLIS
H
• Press to enter the document height. The
height or the ISO format of the document will be
displayed next to the relevant feeder.
- Press to select a feeder. The selected
feeder will be highlighted.
- Press to display a numeric keypad to
enter the exact dimension of the document.
Press to clear the displayed dimension and
to enter a new dimension.
Dimensions can be entered in millimeters, inches or as standard ISO paper
dimensions (depending on installation settings).
The machine will not allow entering dimensions outside of technical ranges.
Feeder 3 (top tray) cannot handle documents smaller than 115 mm (4.5”), unless the
Intermediate Transport Option is installed. When Intermediate Transport is installed,
the minimum document height is 90 mm (3.5”).
• Press to link two feeders. This function allows
for filling two adjacent feeders with the same
documents. When the first feeder is empty, the
system automatically swaps to the other feeder.
- Press to select two adjacent feeders. The
selected feeders will be highlighted
- Press to link two highlighted feeders.
The will be displayed between the selected
feeders.
Note
When linking two feeders, the program will automatically equal the number and format of
the documents in the selected feeders.
• Press to enable the Daily Mail function.
The Daily Mail function allows operators to process
process documents, or sets of documents,
which can not be processed automatically.
This function is only available for to top feeder.
(Refer also to “Daily Mail” on page 16).
The top feeder will automatically be selected.
• Press to enable the Daily Mail function and
press again to disable the function.
JOB 8
ESCAPE OK
1
2
3
100
100
A4
DOCUMENT SETTINGS
CE
JOB 8
ESCAPE OK
1
2
3
100
100
A4
DOCUMENT SETTINGS
JOB 8
ESCAPE OK
1
2
3
100
100
A4
DOCUMENT SETTINGS