Formax 6302 Series - Manual (Page 49)

47
ENGLIS
H
Flap not
sufficiently
moistened Water level low Check water level,
refill if needed “Sealing Envelopes” on
page 14
Brushes dry Check brushes,
replace if needed with
the extra soaked set
“Sealing Envelopes” on
page 14
“Maintenance” on
page 41
Brushes dirty Check brushes, clean
if needed “Maintenance” on
page 41
Moistening cloth dry Check the moistening
cloth, refill water tray
if needed
“Sealing Envelopes” on
page 14
Moistening cloth dirty Check the moistening
cloth, clean if needed
“Maintenance” on
page 41
Moistening brushes
inactive Activate the
moistening brushes “Sealing Envelopes” on
page 14
Envelope not
filled properly or
envelope flap not
closed properly Inserted document
too big Check fold settings,
adjust if needed “Document Settings” on
page 24
Document not
inserted deep enough Check adjustment of
envelope stop
position and fingers “Insert Position” on
page 15
No document fed Feeder empty Refill feeder “Loading Documents” on
page 11
Separation set too
wide Adjust the separation “Document Separation”
on page 11
Side guides set too
narrow Adjust the side
guides “Adjusting Side Guides”
on page 11
Skewed
documents fed Side guides set too
wide Adjust side guides “Adjusting Side Guides”
on page 11
Symptom Possible cause Remedy Refer to section