Formax 6302 Series - Manual (Page 15)

13
ENGLIS
H
3.5 Loading Envelopes
Adjusting Side Guides
Adjust side guides C by rotating thumbwheel D, so
that the envelopes:
- fit exactly between the side guides.
- can move freely.
NOTE
If the distance between the side guides is too large,
the envelopes will twist sidewards, when transported
into the machine.
Envelope Separation
1. Turn knob A counterclockwise as far as possible.
2. Slide an envelope (with closed flap) between the rollers in the machine and turn knob
A clockwise until a slight resistance is felt when moving the envelope in and out of the
machine.
When the resistance is too high, turn knob A counterclockwise, until only a slight
resistance is felt.
Feeding Envelopes
1. Place the bottom envelope between the rollers
(flap down and trailing - bottom side of envelope
pointing to machine).
2. Loosen the stack of envelopes and place the
stack on top of the bottom envelope.
3. Shift envelope support B in or out, so that the
flap side of the envelope is lifted approximately
20 mm (0.8”).
Turn envelope support B so the weight of the
envelopes is distributed evenly on both sides.
D C A
B
C