Formax 6302 Series - Manual (Page 13)

11
ENGLIS
H
3.4 Loading Documents
Document Orientation
Adjusting Side Guides
1. Loosen knob B half a turn.
2. Move the side guides outwards.
3. Place a small stack of documents between the
side guides.
4. Move the side guides A and C to the document,
so the documents have just enough space to
slide between the side guides.
5. Tighten knob B.
Document Separation
The term ‘Document separation’ refers to the
adjustment required for separating the upper
document from the rest of the documents in the
stack. This prevents documents being picked up from the stack at the same time.
The document separation for the automatic feeders is set automatically.
The special feeder (fitted in the lowest, first position) can be manually adjusted.
Adjust the manual document separation as follows:
feeder swap two documents document + enclosure one document
no fold
single fold
letter fold
zig-zag fold
Address carrier in
upper feeder.
Face up and leading. Address carrier in upper
linked pair feeders.
Face up and leading. Address carrier in
upper feeder.
Face up and leading. Address carrier in upper
feeder.
Face up and leading.
Address carrier face
down and trailing. Address carrier in lower
linked pair feeders.
Face down and trailing. Address carrier in lower
feeder.
Face down and trailing. Address carrier in upper
feeder.
Face down and trailing.
double
parallel fold
B
C A