Flowserve 3400IQ Digital Positioner - Manual (Page 2)

Logix 3400IQ Digital Positioner FCD LGENIM3401-00 – 06/06
Contents
1 Terms Concerning Safety 4
2 General Information 4
3 Unpacking and Storage 5
3.1 Unpacking 5
3.2 Storage 5
3.3 Pre-installation Inspection 7
4 Logix 3400IQ Positioner Overview 7
4.1 Specifications 10
4.2 Positioner Operation 11
4.3 Detailed Sequence of Positioner Operations 12
5 Mounting and Installation 14
5.1 Mounting to Valtek Linear Mark One Valves 14
5.2 Mounting to Standard Valtek Rotary Valves (See Figure 4) 15
5.3 Optional Valtek Rotary Mounting Procedure (See Figure 5) 17
5.4 NAMUR Mounting Option 18
5.5 Tubing Positioner to Actuator 18
6 Wiring and Grounding Guidelines (See Figure 6) 19
6.1 FF Command Input Wiring 19
6.2 Grounding Screw 19
6.3 Segment Compliance Voltage (See Figure 7) 20
6.4 Cable Requirements 21
6.5 Intrinsically Safe Barriers 21
6.6 DD Support 21
7 Startup 22
7.1 Logix 3400IQ Local Interface Operation 22
7.2 Initial DIP Switch Settings 22
7.3 Description of Configuration DIP Switch Settings 23
7.4 Description of Cal DIP Switch Settings 26
7.5 RE-CAL Operation 26
7.6 Manual Jog Calibration Operation 27
7.7 Local Control of Valve Position 27
7.8 Factory Reset 27
7.9 Logix 3400IQ Status Condition 27
7.10 Version Number Checking 30
7.11 375 Handheld Communicator 31
7.12 Device Description (DD) Files 31
7.13 Calibration 31
7.13.1 CALIBRATE_FLAGS 31
7.13.2 Control and Tuning 32