DNF Controls GTP-32 - Manual (Page 8)

- 8 -
3) In the “Old password” entry box, enter the current password.
Note: When shipped from the factory, the default password is
“controls”, all lower case.
4) Enter the new password in the “New Password” entry box.
5) Enter the new password in the “Verify New Password” entry box.
6) Click on “Save” to save the new password, or click on “Cancel” to
exit without changing passwords.
Note: If the “New Password” entry and the “Verify New Password”
entry do not match, an error will be displayed.
SET SYSTEM LABEL
The System Label is used to uniquely identify a GTP-32. This name is
associated with the IP address.
Using the web browser:
1) From the GTP-32 Home Page, click on the “System” link. The
System page will be displayed.
2) Click on “Set System Label”. The Set System Label page will be
displayed.