DNF Controls GTP-32 - Manual (Page 20)

- 20 -
4. In the Local Event Label field, enter a unique label for this
event. This label may be a maximum of 15 characters.
5. In the Remote Event Label field, enter the label of the event on
the remote GTP-32 that will be monitored.
6. In the Remote IP field, enter the IP address of the GTP-32 that
contains the event you wish to monitor.
7. (OPTIONAL) If you wish to disable the functionality of this
event, select No from the Enabled pull down menu.
8. Click on the Add button to save the entered information
OR
Click on the Back button to return to the Remote Event
Definitions table without saving.
2) Deleting Remote Event Definitions
1. Click on the Event Definitions link near the top of the page.
2. Click on the Remote Events link.
3. Click on the Delete link near the top of the Remote Event
Definitions table.
4. Using the checkboxes to the left hand side, select the Remote
Event Definitions to be Deleted, then click on the Delete button.
5. A confirmation prompt will be displayed. Press the Delete
button to delete the selected events, or press the Back button
to return to the Remote Event Definitions table.