DNF Controls GTP-32 User Manual
Page 33
- 33 -
10)
Select the “OFF FUNCTION”. This is the function that will execute each time
the Source Event turns off. If the function is controlled by more than one
Source Event, all Source Events must turn off before the OFF FUNCTION will
execute.
11)
Click on SAVE and EXIT to save the entry and exit to the previous page.
12)
Click on SAVE and Add to save the entry and continue to add events, or click
on DONE to exit without saving.
Note: Duplicate events are not permitted in the table. If an added row is a duplicate
of an existing row, the new row will not be added to the table.
EDIT A ROW IN THE EVENT MONITORING TABLE
1)
Click on the “Event Monitoring” link at the top of the page. The Event Monitor
Table will be displayed.
2)
Click on the Edit link near the top of the table. The row selection page will be
displayed.
3)
Using the check boxes on the left hand side, check the desired rows to be
edited, or check the All box to select all rows.
4)
Click on “EDIT” at the top or bottom of the table, or click on “BACK” to return
to the previous page.