DNF Controls GTP-32 - Manual (Page 29)

- 29 -
1) Click on the Action Definitions link near the top of the page.
2) Click on the Time Actions link.
3) Click on the Display Status link just above the Time Delay Action
Definitions table. The table displayed will contain information
regarding each active delay action. Completed/Cancelled actions
will be continue to be displayed for 10 seconds, and then removed
from the table.
4) Click on the Refresh link to update the current display.
5) Click on the Abort link to cancel a delayed action, or click on the
Execute link to execute a delayed action immediately.
GROUP ACTIONS
Group Actions allow multiple channels to be affected by the same action
simultaneously without requiring multiple entries in the Event Monitoring
Table. Channels may be added to or removed from the group at will without
requiring a reboot. A set of predefined Group Actions for changing a channels
Group Assignment are automatically created within the GTP. User-defined
Group Actions can be created to affect the channels within that group.
Predefined Group Actions
Action Label Function
GM_CHX_Grp_Tgle Increment the current Group number for the selected channel
GM_CHX_Grp_Off Set the Group number to zero for the selected channel
GM_CHX_GrpY_On Set the Group number to the selected number for the selected
channel
GM_GrpY_Clr Set the Group number to zero for all channels currently in the
selected Group.
1) Configure Group Ranges for Channels
1) Click on the Protocol Assignment link near the top of the page.
2) Click on the Edit Protocol Assignment Table link above the Protocol
Assignment Table.
3) Using the drop down menus provided, select the range of available
Groups for each channel.
4) Click on the Save button to save the changes made, or click on the
Back button to return to the Protocol Assignment Table without
saving.
2) Create User-Defined Group Actions