DNF Controls 2044CL_(-A, -O, -NX, -7, -8, -T, -P) - Manual (Page 32)

UNIT SETUP TABLE
Turn the wheel to select a menu option.
Press the {CHANGE} softkey to access the selected option.
Press the {BACK} softkey to accept the changes and return to the selection menu.
Press the [ESC] softkey to exit the Setup Menu.
PARAMETER DESCRIPTION
RECALL
MODE
Press {NORMAL} or {REDIRECT}.
{REDIRECT}
When one and only one clip is learned into a Cue Point, the Clip will be
REDIRECTED to load on the currently selected VTR
{NORMAL}
The cue point will load on the learned VTR.
GANG
MODE
{PERM} Permanent Gang-
The GANG can be created and undone only with the [GANG] softkey.
{TEMP} Temporary Gang-
The GANG is created using the [GANG] softkey. Quickly undo the GANG by
pressing any VTR key.
DESTINATION
CHANNEL
SELECT
Select [VTR1], [VTR2], [VTR3], [VTR4], or [VTR5] ({7} or {8} on -7
or -8 version) to be the destination (recorder) channel for Capture Function.
[VTR6] cannot be selected.
REF. VIDEO Select the appropriate softkey to enable or disable the reference video
{ON}, {OFF}.
LEARN CLEAR Press {ON}, {OFF}. {ON} will clear the IN and OUT points for the loaded
clip after the clip has been "learned" into a cue point.
SCREENSAVER Press {ON}, {OFF} to select to select the desired mode:
ON = Screen backlight will turn off after about 20 minutes.
OFF = Screen will remain on constantly unless LiteOFF has been selected
PBIO OPTION ONLY
PB ADDRESS Select [VTR1], [VTR2], [VTR3], [VTR4], [VTR5], or [VTR6].
Assign Pbus Device Address to selected VTR by entering an address between
0 and 23. Or, press DEL to clear the Pbus Device Address.
PB
SWITCHER
Select {GRASS VALLEY} or {SONY} Production Switcher. For Philips, use
Grass Valley.
PBIO PARITY Press {NONE}, {ODD} or {EVEN} parity to match the Pbus setting on your
Production Switcher.
Page 2 2 8 8 o o f f 3 3 9 9 2044CL Instant Clip Access System