DNF Controls 2044CL_(-A, -O, -NX, -7, -8, -T, -P) - Manual (Page 30)

CHANNEL SETUP TABLE
Turn the wheel to select a menu option.
Press the {CHANGE} softkey to access the selected option.
Press the {BACK} softkey to accept the changes and return to the selection menu.
Press the [ESC] softkey to exit the Setup Menu.
PARAMETER DESCRIPTION
PROTOCOL Set each channel as required.
Select {BVW}, {AMP}, {ODETICS}, or {NX}.
{BVW}
Select BVW to control video server like a VTR. In this mode, the clip must
have already been loaded.
{AMP}
Select AMP if controlling GVG M-series, K2, TURBO, or PROFILE with AMP
Protocol.
{ODETICS}
Select ODETICS if controlling a server with ODETICS Protocol.
{NX}
Select NX if controlling a Leitch Nexio.
STANDARD Press {NTSC, {DF}, or [PAL] to select the video standard for time
calculations.
RECORD MODE Set each channel as required.
Press softkey to select to select the desired record mode:
{Lockout}, {Crash} (Full).
RECORD
DELAY
Enter delay value. (Used by CAPTURE function.)
PREROLL Enter Preroll value.
TIMECODE Set each channel as required.
Select {NOT SUPPORTED} to have TC search on the GVG profile servers, or
{SUPPORTED} for all other servers.
WORK
FOLDER
(AMP Protocol
Only)
Displays the currently selected Working folder.
Refer to Section 20 for instructions on how to change the working directory.
(Always set to Default in Odetics)
Not applicable in BVW mode.
Page 2 2 6 6 o o f f 3 3 9 9 2044CL Instant Clip Access System