DNF Controls 2044CL_(-A, -O, -NX, -7, -8, -T, -P) - Manual (Page 15)

OPERATIONS . . .
5.
A.
B.
C.
6.
A.
LOAD A CLIP ON THE ST400
Select a VTR by pressing VTR [1], [2], [3], [4], [5], or [6] key. ({7} or
{8} on -7 or -8 version).
Press [CLIP LIST] to view the list of CLIP IDs that are resident on the
Video Server. The CLIP LIST indicator will turn on.
Turn the Wheel to view the existing CLIP IDs on the video server.
Turn the Wheel clockwise to scroll forward, or counter-clockwise to scroll
backward, through the list of available CLIPs. Backward scrolling is
limited to the last 10 screens of CLIP IDs.
Press [LOAD] to load the highlighted CLIP ID. After loading the selected
clip, the CLIP LIST function will terminate. The CLIP LIST indicator will
turn off.
OR
Press [ENTER] on the ST400 to manually enter a Clip ID using the ST400
numeric keypad or Shotbox “QWERTY” keyboard, or PC keyboard.
Enter the desired clip ID up to 32 characters.
Press [ENTER] to load the entered CLIP ID for playout. If using a PC
Keyboard press ENTER on the PC keyboard.
Repeat steps A. - B. to load clips on desired VTRs.
PLAY CLIP SEGMENT
Load a clip on the selected channel. See section: 5; LOAD A CLIP or See
section: 9; RECALL A CLIP
ON THE ST400
Optional:
Set an IN Point and OUT Point.
Jog/Shuttle to the desired IN point. Press [IN].
Jog/Shuttle to the desired OUT point. Press [OUT].
OR
Press [SHIFT] + [IN]. Manually enter the IN time on the
numeric keypad. Press [ENTER].
Press [SHIFT] + [OUT]. Manually enter the OUT time on
the numeric keypad. Press [ENTER].
1) Press [PLAY].
The clip will play from its current time to the OUT point, and then stop.
2) Press [RECUE]. The clip will cue to the IN point.
B. ON THE SHOTBOX
1) Press [PLAY].
The clip will play from its current time to the OUT point, and then stop.
2) Press [RECUE]. The clip will cue to the IN point.
2044CL Instant Clip Access System Page 1 1 1 1 o o f f 3 3 9 9