DNF Controls 2044CL_(-A, -O, -NX, -7, -8, -T, -P) - Manual (Page 31)

UNIT SETUP TABLE
Turn the wheel to select a menu option.
Press the {CHANGE} softkey to access the selected option.
Press the {BACK} softkey to accept the changes and return to the selection menu.
Press the [ESC] softkey to exit the Setup Menu.
PARAMETER DESCRIPTION
WIND MODE Press Softkey to select:
{HOLD} (Fast wind is maintained only while key is depressed.)
OR
{LATCH} (Fast wind is maintained after key is released.)
Set the fast wind speed (3.9 to 23.7) by pressing the {SPEED} softkey.
Set each channel as required.
SLOMO Press the {TBAR} (or {WHEEL}) softkey to select the T-bar or wheel for
slomo.
For T-bar:
The T-BAR has a speed range of 0 Æ 2x with a detent at 1x play
speed
OR a range of 0 Æ 1x (detent at 1x Play speed).
Press {SPD-RNG} softkey to toggle between SLOMO speed ranges:
0 Æ 1x OR 0 Æ 2x.
Press {BACK} softkey to return to SLOMO MENU.
Press [ESC] to exit OR turn the Wheel to select another item.
For Wheel:
Press the {PRSET} sofkey to toggle between UPDATE and STATIC
modes.
UPDATE; When exiting SLOMO mode, the last used speed is saved in
the Preset Speed register.
STATIC: The Preset Speed register is NOT updated when exiting
SLOMO mode.
It is only changed by [SHIFT] + [SLOMO] (PRESET
SLOMO).
Press {SPD-RNG} softkey to toggle between SLOMO speed
ranges: 0 Æ 1x OR 0 Æ 2x.
RECORD KEY Select {REC} or {REC + PLAY}
{REC} Use the
[REC] key only to start record.
{REC + PLAY} Use the [REC] + [PLAY] keys to start record
2044CL Instant Clip Access System Page 2 2 7 7 o o f f 3 3 9 9