DNF Controls 2044CL_(-A, -O, -NX, -7, -8, -T, -P) - Manual (Page 24)

D.
18.
A.
B.
C.
D.
E.
F.
19.
A.
B.
C.
D.
Press [SHIFT] + [RECORD].
The display will prompt for a CLIP ID.
Manually enter a CLIP ID (maximum of 8 characters in Odetics or 32
characters in AMP, or NX ) using the numeric keypad, the Shotbox
QWERTY keyboard, or PC keyboard.
Press {CREATE} to accept the entered CLIP ID.
The SOURCE VTR will preroll to it's IN point, then play. The video server
will start recording at the SOURCE’S IN point and stop recording at the
SOURCE’S OUT point.
The created clip will be loaded on the destination channel.
CREATE A SUBCLIP (AMP, OR NX ONLY)
Load a clip as described in Section 5, LOAD A CLIP.
Mark (enter) an IN and/or OUT point. Note: At least one point has to be
marked in order to create a subclip.
Press [SHIFT] + [CLIPLIST].
Enter a new clip name using a PC keyboard or a numeric keypad.
Press {CREATE}.
The new clip is created in the working directory. The new clip has entered
name. Its SOM is the IN point (if the IN point was marked; otherwise, it’s
the SOM of the original clip), and EOM is the OUT point (if the OUT point
was marked; otherwise, it’s the EOM of the original clip).
CREATE CUE POINT LABELS
Use LABELS mode to assign meaningful names to cue points. Rather than
viewing cryptic CLIP IDs on the Shotkeys, LABELS provides a faster and easier
method to select cue points.
If different parts of the same clip are assigned to many Shotkeys, LABELS
allows a unique name to be assigned to each Shotkey.
ON THE ST400
Select cue point to label.
Press the [LABEL] key.
Manually enter a label, up to 12 characters in length, using the numeric
keypad, ST420 Shotbox QWERTY keyboard, or PC keyboard.
Press the [LOAD] shotkey on the Shotbox to assign the entered label to the
selected cue point.
OR
[ENTER] on the ST400.
OR
[ENTER] on the PC keyboard.
OR
[ESC] to exit without save.
NOTE:
Labels are saved in non-volatile memory in the ST400, not in
the Shotbox. They are not saved in the video server.
Page 2 2 0 0 o o f f 3 3 9 9 2044CL Instant Clip Access System