DNF Controls 2034CL-O-PBIO vs.3.1 - Manual (Page 25)

25 2034CL-O, Vs. 3.1, 300 Clip Instant Access System, Odetics Protocol,
PBIO Option
PBIO ADDRESS Press VTR key to select the VTR to which to assign a PBIO address.
Display shows:
Enter address number desired on numeric keypad.
Repeat for all VTRs assigned.
SWITCHER TYPE Select your switcher type.
GVG = Grass Valley Group (default) or Sony.
For Philips DD35 with PBus, use GVG.
PARITY Select Parity type Switcher is putting out on the PBUS:
ODD, EVEN or NONE
ENTER
PREROLL
Enter the desired preroll value using the ST300’s numeric keypad.
Turn wheel to save the entered value OR press [ESC] to exit without saving.
RECORD
DELAY
Enter up to 99 frames record delay (used in Capture Function).
Typical value is 3 frames.
CONTROL
MODE
SELECT Select Control mode Odetics\BVW.
Have Odetics selected for video server control and clip access.
Have BVW selected to access media by timecode.
TRANSMIT
CUELIST
Transmit Cuelist to another ST300 or to a PC.
See Section: “Transfer Cue List.”
RECEIVE
CUELIST Receive Cuelist from another ST300 or a PC.
See Section: “Transfer Cue List.”
PBIO Address = 00
Enter 00-23