DNF Controls 2034CL-O-PBIO vs.3.1 - Manual (Page 16)

16 2034CL-O, Vs. 3.1, 300 Clip Instant Access System, Odetics Protocol,
PBIO Option
15. BVW MODE
If you wish to control a tape machine or a DDR with the 2034CL-O system, select control
MODE=BVW (see Setup Menu section). In this mode, the media is accessed by timecode, not by
clip names. The cuepoints in BVW mode consist only of IN point, OUT point and Gang
information.
The following functions are not available in BVW mode:
- View Clip ID
- Recue Clip
- Loop Clip
- Capture
- Create Clip
All other functions work as described in the manual.