DNF Controls 2034CL-O-PBIO vs.3.1 - Manual (Page 18)

18 2034CL-O, Vs. 3.1, 300 Clip Instant Access System, Odetics Protocol,
PBIO Option
Advanced Features . . .
17. CREATING A CLIP
Only available in Odetics Control Mode.
a.
Press [CLIP LIST]. The display will show “CREATE NEW CLIP.”
b. Press [LOAD]. The display will show the default CLIP ID.
c. Press
[ENTER] to accept the default CLIP ID.
OR
Enter an ID with a maximum of 8 characters using the SHOTBOX’s Qwerty.
NOTE: For numbers on the SHOTBOX keyboard, use bank keys 0-9.
OR
Enter a numeric ID with a maximum of 8 characters using the ST300’s numeric keypad.
d. Press
[ENTER] on the ST300 to create the selected CLIP ID.
e. If the selected CLIP ID already exists, a warning message will be displayed. To load the
existing clip, press [ENTER]. Press [ESC] to exit without loading the existing clip.
18. CAPTURE FUNCTION
Only available in Odetics Control Mode.
The CAPTURE function allows source material from a VTR to be easily and quickly recorded
into the VIDEO SERVER. A CLIP ID is also created.
VTR1 is always the Recorder (the VIDEO SERVER).
Select VTR[2] or VTR[3] as the source VTR. Any RS422, SONY protocol compatible VTR can
be used.
Use the transport function keys to control the source VTR. Each source VTR has its own set of
IN and OUT points.
a. ENTER PREROLL VALUE
1) Press [MENU] and turn the Wheel to “Enter PREROLL:”
2) Enter the desired preroll value using the ST300’s numeric keypad.
3) Press [ENTER] to save the entered value.
OR
Press [ESC] to exit without saving.