DNF Controls 2034CL-O-PBIO vs.3.1 - Manual (Page 17)

17 2034CL-O, Vs. 3.1, 300 Clip Instant Access System, Odetics Protocol,
PBIO Option
16. LEARN A CLIP OR CLIP COMBINATION (BVW
MODE)
a. Select the desired Cue Point by pressing [NEXT CUE], [LAST CUE], or by manually
entering the Cue Point using the numeric keypad.
The selected Cue Point number is shown on the bottom line of the display.
b.
Locate the clip to the desired IN time. Press [IN] to mark the IN time.
c. Locate the clip to the desired OUT time. Press [OUT] to mark the OUT time.
d. Press [SHIFT] + [MARK] to start the LEARN.
The first line of the display will show “Select VTRs:”
The second line of the display will show “Mark-Lrn, ESC-cancel.”
e. Press VTR[1], VTR[2], VTR[3] or VTR[4] to select the VTR to be learned into the
current Cue Point.
If the VTRs are ganged, select one VTR that is part of the Gang. The rest of the Gang
will learn automatically.
f. Press [MARK] to complete the LEARN.
OR
Press [ESC] to exit without LEARNING.
The ST300 will: LEARN (save) the VTR number (1,2,3,4) and current IN & OUT time
to the selected Cue Point.