Daktronics Venus DataStreamer - Manual (Page 80)

74 Playlist Manager
2. Click in the Start Time field and adjust the start time of the message by either typing
in the time or using the up and down arrows on the right. Repeat the same procedure
for the Stop Time field.
Note: The scheduled start time must be earlier in the day than the stop time or the
message will not be shown
3. Click into the First Date and type the date the message should start using the
mm/dd/yyyy format. Repeat this process for the Last Date.
Note: The scheduled start date must be earlier in the year than the stop date or the
message will not be shown.
4. Place a check mark under the days of the week on which the message should be
displayed.
5. Click Update Display for the changes to take effect and the message will be
effectively scheduled.
Note: The schedule may not begin to run at the exact start time. This occurs because the
buffer in the controller needs to be allowed to display all messages before the schedule can
start. Once the buffer is cleared, the schedule will begin running.
9.8 Exiting the Playlist Manager
To exit the Playlist Manager, click the X in the upper right corner of the screen.