Daktronics Venus DataStreamer - Manual (Page 44)

38 Creating Messages for a DAKTicker
16. From the File pull-down menu, click Save As to save the message and information.
The message is now saved and ready to be sent to the display.
6.5 Adding a Financial Frame
Specific information must be entered in order for a financial frame to update and display
properly. To add a financial frame, complete the following steps:
1. Click the Financial icon located on the left
toolbar. The Financial window will appear
as a new frame in the message.
Note: For this version of the Venus
DataStreamer software, the Driver field
cannot be changed.
2. Click the down arrow next to the field
Select a Query and select the desired
query as shown in Figure 62.
3. Click the Data tab and the screen will
change to show the following window as
shown in Figure 63. To add Symbol and
Name fields, click the green plus + in the
top right of the dialog.
4. Place the cursor into the Symbol field and
enter the stock symbol of the company
that is to be displayed.
5. The default name from the data source
can be replaced, if preferred. Place the
cursor in the Name field and enter the
company name to replace the default.
6. Click the Appearance tab to set the
layout of the information on the display
as shown in Figure 64.
Figure 62: Financial Frame Dialog
Figure 63: Financial Data Screen
Figure 64: Financial Data Appearance Tab