Daktronics Venus DataStreamer - Manual (Page 21)

Configuration 15
Source Tab
Note: The default values set here should only be changed if directed by Daktronics.
1. Place a checkmark in the Edit box next to
the field to be changed as shown in
Figure 18.
2. The selected address field is now active.
Click in the address field and make
necessary address changes.
3. Click Apply to complete.
Configuring the Weather Driver
To configure the Weather driver:
1. Click File from the pull-down menu and click Configuration. The main
configuration window will appear.
2. Click the Driver Configuration tab.
3. If registered for this driver source,
the box next to it is checked and the
configuration can proceed. If not
currently licensed to receive data,
please contact a Daktronics Sales
representative for more information.
4. If registered, highlight the DTN
Weather Driver on the left. Then
click Configure Data Source.
5. Enter the configuration data as
supplied by Daktronics as shown in
Figure 19.
6. Set the frequency that the information should be updated either by using the down
arrow next to the field or by clicking into the field itself.
Figure 18: Source Tab Dialog
Figure 19: Configuring the Weather Driver