Daktronics Venus DataStreamer - Manual (Page 15)

Configuration 9
Section 3: Configuration
After installing the Venus DataStreamer software on the computer, the individual displays must be
configured. The required steps are covered in this section. Refer to Figure 5.
This section provides basic instructions and examples for configuring DAKTickers and DataTrac
displays that are controlled with the Venus DataStreamer software.
3.1 DAKTicker Display Configuration
Displays will need to be configured once the software is installed. To launch the
configuration window, click the File menu, and then click Configuration (File >
Configuration).
1. Click Add New Display and a pop-up window will appear asking what type of
display is being configured.
2. Click the down arrow to select the DAKTicker.
3. Click OK to move on to the next step or Cancel to void the configuration process.
Figure 5: Main Configuration Window