Daktronics 2000 Rodeo OmniSport - Manual (Page 50)

42 Judges’ Console Operation
JUDGE 1: ^^.^*
#1262 Rider JUDGE 1: ^^.^*
#1262 Stock
JUDGE 1:R20.0
#1262 OK
JUDGE 3:
READY TO START
JUDGE 3:
READY TO STOP
JUDGE 3: 0.00
PRESS RESET
2 Rider/2 Stock Mode
In the 2 rider/2 stock mode, 4 judges’ consoles are always used. Judges 1 and 2 enter the
riders score, and judges 3 and 4 enter the stock score. The four scores are added for the total.
Maximum Scoring Values
Re-ride Select
The judges’ consoles can be used to select a re-ride when
the score is entered. Press the Re-ride/Penalty key to
alternately toggle the re-ride ON and OFF. An “R” appears
to the left of the score if it is ON.
Start, Stop, & Reset
In scored events, a judge console can be used to remotely start, stop and reset the timer. With
one judge, Judge 2 will do this; with two judges, Judge 3 will do this; and with four judges,
Judge 5 will do this. If ANY JUDGE START is set to YES, then any judge console can start,
stop, and reset the timer (refer to Section 5.4).
 At this prompt, press [START] to start the timer.
When running, time is shown to the nearest second.
 At this prompt, press [STOP] to stop the timer. The
other judges’ consoles will then be able to enter scores.
 At this prompt, press [RESET] to reset the timer.
When stopped, time is shown to hundredth of a second.
Score Editing
After a score is entered, it may be changed by pressing [EDIT]. This clears the current score
so a new score may be entered. If the scores have already been accepted, the OmniSport
operator must press [ENABLE JUDGES CONSOLES] to reactivate the [EDIT] key.
Mode 2 Judges 4 Judges
Combined 50.0 50.0
Separate
Stock
Rider
25.0
25.0
25.0
25.0
Total/Stock
Total
Stock
50.0
25.0 or max of
total score
50.0
25.0 or max of
total score
2 Rider/2 Stock
Rider
Stock
N/A
N/A
25.0
25.0