Daktronics 2000 Rodeo OmniSport - Manual (Page 34)

26 Rodeo Timer Operations
Copy Now Up to Leader
Press [COPY NOW UP TO LEADER] to copy the Now Up number and time/score to the
current leader values. This key could be used when the current competitor has become the
new leader.
Clear Now Up
Press [CLEAR NOW UP] to clear the Now Up number and time/score values on the
scoreboard. This can be used at the end of a run.
Clear Previous
Press [CLEAR PREVIOUS] to clear out the previous competitor number and time/score in
the Real-Time Data (RTD) stream.
Clear Display
Press [CLEAR DISPLAY] to clear all scoreboard items. This can be used at the end of an event.
Reride
Press [RERIDE] to toggle the reride caption/indicator on or off. The reride status quickly
displays on the right LCD.
No Time
— No Score
Press [NO TIME — NO SCORE] to display “NO TIME” or “NO SCORE” on the scoreboard
and printout, depending on the current console mode of operation.
Start
Press [START] to start the main timer. In Timed Events mode, all timers start simultaneously.
Stop
Press [STOP] to stop the main timer. In Timed Events mode, all timers stop simultaneously.
Reset
Press [RESET] to set the timer values to their original value. If any timers are currently
running, press [ENTER] to confirm the reset.
Note: If the timer is set to count down (Scored Events mode), the timer will be reset to
the default horn time. In all other cases, the timer or timers will be reset to 0.