Daktronics 2000 Rodeo OmniSport - Manual (Page 38)

30 Rodeo Timer Operations
4.4 Scored Events & Cutting Keys
Press [SCORED EVENTS] to select Scored Events mode.
Press [CUTTING] to select Cutting mode.
Set Main Clock
Display Action
MM:SS = minutes, seconds,
tenths, hundredths
Press [SET TIMER 1/PHOTOCELL] to modify the main clock
value before a run has been started. Enter the desired time
using the number keypad, and then press [ENTER].
Count Up/Dn
Display Action
Press [COUNT UP/DN] followed by a number key:

Press [1] to set the main clock to count up.

Press [2] to set the main clock to count down.
Note: The direction of the main clock is shown by the arrow
on the center LCD.
4.5 Judges Keys
Number of Judges
Display Action
N = current value
Press [# OF JUDGES], enter the number of judges using the
number keypad, and then press [ENTER].
Note: The number of judges may only be set to 1, 2, or 4 for
Scored Events or 1, 2, 3, or 5 for Cutting.
SET TI ME
TI MER MM:SS.TH *
MAI N CLOCK- DOWN
1=UP 2=DOWN
NUMBER OF JUDGES
N*