Daktronics 2000 Rodeo OmniSport - Manual (Page 37)

Rodeo Timer Operations 29
Set Timer Keys
Display Action
MM:SS = minutes, seconds,
tenths, hundredths
Press [SET TIMER 1/PHOTOCELL], [SET TIMER 2], or [SET
TIMER 3] to modify the final timer values after a run has been
completed. Enter the desired time using the number keypad,
and then press [ENTER].
Notes:

In Automatic Timing mode, press [SET TIMER 1/
PHOTOCELL] at the completion of a run to modify the
photocell time for the run.

Set Timer keys are enabled only at the end of a run.
Results are sent after each timer value is edited.

The time value set using the Set Timer keys does not
include the penalty time. Press [PENALTY] to set or
modify the penalty time for a run.
Enable/Disable Photocell
Press [ENABLE/DISABLE PHOTOCELL] to activate or deactivate the photocell input.
Penalty
Display Action
MM:SS = minutes, seconds
Press [PENALTY] after a run has been completed, enter the
penalty time using the number keypad, and then press
[ENTER]. The penalty time is added to the current official timer.
The PENALTY caption/indicator will also turn on.
Pressing [PENALTY] a second time clears the penalty time for
the current competitor, restores the official timer to its original
value, and turns off the penalty caption/indicator.
Notes:

[PENALTY] is only enabled after the official timer is set
(individual timers are stopped).

Penalty times are cleared after pressing [RESET] or
[CLEAR NOW UP].
Rearm Stop
Press [REARM STOP] to undo the last [STOP] key press. All timer values will be restored to
the value they would have displayed if they hadn’t been stopped. Once [RESET] has been
pressed, the timers cannot be restored.
Note: This key can be used to undo an accidental stop from manual timers and photocells.
SET TI MER 1
MM:SS.TH *
PENALTY TI ME
MM:SS *
PENALTY - OFF