2 resources, 3 reference guides, Resources – Daktronics 2000 Rodeo OmniSport User Manual
Page 10: Reference guides
2
Introduction
1.2 Resources
Figure 1 illustrates a Daktronics
drawing label. The drawing number is
located in the lower-right corner of a
drawing. This manual refers to
drawings by listing the last set of digits
and the letter preceding them. In the
example, the drawing would be
referred to as Drawing C-325405.
Reference Drawing:
System Riser Diagram ............................................................................Drawing C-325405
Daktronics identifies manuals by an ED or DD number located on the cover page of each
manual. For example, this manual would be referred to as ED-14843.
1.3 Reference Guides
Daktronics provides OmniSport 2000 timing system users with supplemental reference guides.
Reference Guide
ED/DD #
OmniSport 2000 Rodeo Quick Reference Guide
Provides basic descriptions of rodeo common keys and menu navigation. Included
in Appendix B.
DD2870296
Rodeo Interface Technical Guide
Advanced display interface setup. Available online a
DD1660229
DakStats Rodeo Manual
Explains the setup and operation of DakStats Rodeo software. Available online at
ED-14946
Figure 1: Daktronics Drawing Label