Daktronics 2000 Rodeo OmniSport - Manual (Page 45)

Rodeo Menus & Settings 37
Horn
This menu allows the final horn to sound in a scored event
even if the clock was stopped before the horn time.
 Press [1] to enable horn after stop. Press [ENTER] to save.
 Press [2] to disable horn after stop. Press [ENTER] to save.
Judge Start
This menu allows for selecting any judge console to start
the clock in scored events.
 Press [1] to enable any judge start. Press [ENTER] to save.
 Press [2] to disable any judge start. Press [ENTER] to save.
5.5 Setup Photocell Menu
Photocell Precision
This menu sets how precise times are when using
photocells. This setting is only Automatic Timing mode.
 Press [1] to time to hundredths of a second (0.00). Press [ENTER] to save.
 Press [2] to time to thousandths of a second (0.000). Press [ENTER] to save.
Photocell Arming
The arming time is the number of seconds after a beam
break where the photocells will be inactive. Any other
beam breaks during this time will be ignored. The
remaining arming time counts down on the LCD.
MENU-TI MER SETUP
6-HORN
From Main Menu – [3]>[1]>[6]
HORN AFTER STOP
1=YES 2=NO YES
MENU-TI MER SETUP
7-JUDGE START
From Main Menu – [3]>[1]>[7]
ANY JUDGE START
1=YES 2=NO YES
From Main Menu – [3]>[2]>[1]
PCELL PRECI SI ON
1-HUNDREDTHS PCELL PRECI SI ON
2-THOUSANDTHS
MENU-PCELL SETUP
1-PCELL PREC
MENU-PCELL SETUP
2-PCELL ARMI NG
From Main Menu – [3]>[2]>[2]
PHOTOCELL ARMI NG
TI ME 03 *
MENU- SETUP
2-PHOTOCELL
From Main Menu – [3]>[2]
Use the number keypad to enter the arming delay
time, and then press [ENTER] to save.