beautypg.com

Section 5: rodeo menus & settings, 1 menu navigation, 2 scoreboard menu – Daktronics 2000 Rodeo OmniSport User Manual

Page 41: Scoreboard on/off, Section 5, Rodeo menus & settings, Menu navigation, Scoreboard menu

background image

Rodeo Menus & Settings

33

MENU-MAI N
1-SCBD MENU

MENU-SCOREBOARD
1-SCBD ON/OFF

Section 5:

Rodeo Menus & Settings

5.1 Menu Navigation

Press [MENU] to access the Main Menu screen. There are
two methods of navigating through the OmniSport menus.

The first method allows the operator to step through each of the menu levels. To use this
method, press [MENU] and then use [←], [→], [↑], and [↓] to scroll through the menus.
Press [ENTER] to select the menu item displayed on the LCD.

The second method is to go directly to a menu. Press [MENU] immediately followed by the
one- to three-digit number from the list below, and the LCD will prompt for the desired setting
or action in that menu. For example, 322 will prompt to enter the photocell arming delay.

When finished navigating the menus and adjusting the desired settings, press [MENU] to exit.
Each menu setting is described in detail in the following sections.

5.2 Scoreboard Menu

The Scoreboard Menu is where the operator can turn the
scoreboard output ON or OFF, select score display, and set
the dimming (brightness) level.

Scoreboard ON/OFF

This menu is used to toggle the scoreboard output ON/OFF.




[1] SCBD MENU

[11] SCBD ON/OFF

[12] SCORE DISPLAY

[13] DIMMING


[2] PRINT MENU

[21] LOGGING

[22] INTENSITY


[3] SETUP MENU

[31] TIMER

[311] TIMER PREC

[312] TIMER MODE

[313] BEEPER

[314] BEEP VOLUME

[315] HALF POINTS

[316] HORN

[317] JUDGE START

[32] PHOTOCELL

[321] PCELL PREC

[322] PCELL ARMING

[323] PCELL SWITCH


[33] NETWORK

[331] NETWORK ENABLE
[332] MAC ADDRESS
[333] IP ADDRESS
[334] SUBNET MASK
[335] GATEWAY ADDRES
[336] SOCKET NUMBER

[4] TEST MENU

[41] BATTERY

[42] SCOREBOARD

[421] CYCLE ON/OFF

Main Menu screen

From Main Menu

– [1] or [ENTER]

From Main Menu

– [1]>[1]

SCBD I S- ON
1=ON 2=OFF

This manual is related to the following products: