Daktronics 2000 Rodeo OmniSport - Manual (Page 43)

Rodeo Menus & Settings 35
MENU-PRI NTER
1-LOGGI NG
MENU-PRI NTER
2-I NTENSI TY
MENU-MAI N
2-PRI NT MENU
5.3 Print Menu
The Print Menu includes settings related to the OmniSport
2000’s built-in printer.
Logging
Print logging automatically prints event results in real time.
Press [←], [→], [↑], or [↓] to toggle the logging feature. Press [ENTER] to save.
Intensity
The print intensity level can be adjusted from 1 to 5, with 1
being the lightest and 5 being the darkest.
Press the number key that corresponds to one of the five intensity levels. The printer will
print a test message with the selected intensity level to allow comparison. Adjust the level
as needed.
5.4 Setup Timer Menu
Timer Precision
This menu sets how times appear on the console LCD.
This setting is only for 1, 2, and 3 Timers modes.
 Press [1] to show times to tenths of a second (0.0). Press [ENTER] to save.
 Press [2] to show times to hundredths of a second (0.00). Press [ENTER] to save.
Timer Mode
This menu sets how official time is obtained using three
timers. This setting is only for 3 Timers mode.
From Main Menu – [2]>[1]
MENU-PRI NTER
PRI NTER LOG: ON
From Main Menu – [2]>[1]
PRI NT I NTENSI TY
LEVEL 1-5: 5*
MENU-TI MER SETUP
1-TI MER PREC
From Main Menu – [3]>[1]>[1]
TI MER PRECI SI ON
1-TENTHS TI MER PRECI SI ON
2-HUNDREDTHS
MENU-TI MER SETUP
2-TI MER MODE
From Main Menu – [3]>[1]
MENU- SETUP
1-TI MER
From Main Menu – [3]
From Main Menu – [2]