Comtest Networks MTAS-192 METALLIC TEST ACCESS SYSTEM User Manual
Page 45
CT-IG-MTAS192-2008-v1_8.doc
Comtest Networks
MTAS-192
June 2006
Installation Guide
39
To manually reset the system for the changes to take effect, the user must
type the following command.
system reset
Otherwise, the new IP settings will not take effect until the system is restarted.
NOTE: For a detailed description of TL1 commands and command syntax, refer to the
MTAS TL1 Guide.
NOTE: For information on using the MTAS after successful installation, refer to the
MTAS-192 User Guide CT-UG-MTAS192-2005.
# # #