Comtest Networks MTAS-192 METALLIC TEST ACCESS SYSTEM User Manual
Page 24
Comtest Networks
CT-IG-MTAS192-2008-v1_8.doc
MTAS-192
18
Installation Guide
June 2006
NOTE: On cards with two circuit boards, align the right-most circuit board with the card
guides (see Figure 16: Inserting a LINE Card Showing Magnified View of Card Guide).
CAUTION: While sliding in cards, ensure that the components on the circuit boards do
not catch on the shelf card tabs.
Figure 16: Inserting a LINE Card Showing Magnified View of Card Guide
Figure 17: Inserting a CONTROL Card Aligned with Card Guides