Comtest Networks MTAS-192 METALLIC TEST ACCESS SYSTEM - Manual (Page 22)

Comtest Networks CT-IG-MTAS192-2008-v1_8.doc
MTAS-192
16 Installation Guide June 2006
RJ-21 female connectors. The kits consist of:
• Hex Nut kit: 8 hex nuts
• Angled Shroud kit: 8 tie wraps, 8 cable tie mounts.
2.10.2 Cards
• One (1) MTAS-CM Test Access Controller card Master or MTAS-CS Test Access
controller card Slave
• Up to eight line cards in any combination of:
o NA-5820 North American Splitter Card(s) or EU-5807 ETSI Splitter Card(s)
OR
o MT-5820(V) North American Splitter(s) with Test Access or MT-5807 ETSI
Splitters with Test Access or MT-5821 ISDN Splitters with Test Access OR
o MT-501 Test Access only card or MT-502 Test Access only card.
NOTE: There is no dongle/ terminator required for the Test Access Link extender bus.
# # #