Comtest Networks MTAS-192 METALLIC TEST ACCESS SYSTEM - Manual (Page 30)

Comtest Networks CT-IG-MTAS192-2008-v1_8.doc
MTAS-192
24 Installation Guide June 2006
4.1.1 MTAS-CM Connectors
The MTAS-CM master shelf control card has three connectors.
Table 8: Connectors of the MTAS-CM
Connector Description
Ethernet
This shielded, female RJ-45 jack for 10/100 BaseT connection allows
TL1 communications with the MTAS-192 via telnet or direct TCP/IP
connection (master shelf only).
COM 1 This shielded, female DB-9 connector acts only as a debug port.
AUX 1
This shielded, female RJ-45 jack provides serial communication. The
device communicates at 9600 baud, with 8 data bits, 2 stop bits, no
parity and no flow control.
Figure 21: Master Shelf MTAS-CM Control Card Faceplate (Rotated 90 Degrees)
4.1.2 MTAS-CS Connectors
MTAS slave shelves have an MTAS-CS control card.
Table 9: Connectors of the MTAS-CS
Connector Description
CRAFT
A shielded, female DB-9 connector labeled as CRAFT acts
only as a debug port.
Figure 22: Slave Shelf MTAS-CS Control Card Faceplate (Rotated 90 Degrees)