Comtech EF Data LPOD-R - Manual (Page 88)

LPOD-R Outdoor Amplifier / Block Up Converter MN-LPODR
Ethernet-based Remote Product Management Revision 1
4–2
o
PS 1/1.5: The J6 | COM1 port on the unit connects to the User PC Ethernet port with the
available CA-0000352 Ethernet Interface Cable (part of CEFD Kit KT-0000203).
• You have recorded the LPOD-R’s Management IP Address.
CAUTION
Comtech EF Data recommends use of the Ethernet-based SNMP interface for
advanced users only. All other users are strongly encouraged to use the LPOD-R web
server interface for remote Monitor and Control (M&C) of the LPOD-R.
4.2 SNMP Interface
SNMP is an Internet-standard protocol for managing devices over IP networks. An SNMP-managed
network has three key components:
• The managed device. This includes the LPOD-R.
• The SNMP Agent. This software runs on the LPOD-R. The LPOD-R SNMP Agent supports both
SNMPv1 and SNMPv2c.
• The user-supplied NMS. This software runs on the User PC.
4.2.1 Management Information Base (MIB) Files
An MIB file is used for SNMP remote management of a unique device, and consist of a tree of
nodes called Object Identifiers (OIDs). Each OID provides remote management of a particular
function. These MIB files should be compiled in a user-supplied MIB Browser or SNMP Network
Monitoring System server.
In these LPOD-R MIB file names,the letter x represents the revision of the file.
4.2.1.1 ComtechEFData Root MIB file
• FW-0000291x.mib
• ComtechEFData MIB file gives the root tree for all Comtech EF Data LPOD-R products (PSx) and
consists of only the following OID:
o
Name: comtechEFData
o
Type: MODULE-IDENTITY
o
OID: 1.3.6.1.4.1.6247
o
Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtechEFData(6247)
Module: ComtechEFData