Comtech EF Data LPOD-R - Manual (Page 102)

LPOD-R Outdoor Amplifier / Block Up Converter MN-LPODR
Ethernet-based Remote Product Management Revision 1
4–16
Current Active Firmware Image # (read-only)
The selected Current Active Firmware Image is shown here. In this example, Image 1 is the
Current Active Firmware Image.
Next Reboot Image
Use the drop-down list to select the Next Reboot Image as Image 1 or 2.
Click Submit to save the change.
Perform Soft Reboot
Click Reboot Now to reboot the LPOD-R using the Current Active Firmware Image.
Firmware Information (read-only)
This read-only window shows information about the currently loaded Bootrom. For the
complete Bulk1 and Bulk2 information, scroll through all the constituent firmware blocks that
make up the bulk.
Part Number (read-only)
This read-only window shows part number information for the unit.