Comtech EF Data SDM-100A - Manual (Page 82)

Operation SDM-100A Satellite Modem
3–48 Rev. 0
SDM-100 "TYPE"
VER: 14.7.4
FUNCTION SELECT
UTILITY
UTILITY
SYSTEM
TIME: HH:MM:SS AM/PM
DATE: MM/DD/YY
REMOTE BAUD RATE
REMOTE ADDRESS
X
OPERATION MODE LAMP TEST??
Current time and date.
110 4800
150 9600
300 19200
600 EVEN
1200 ODD
2400 NONE
X = 1 to 255
DUPLEX
RECEIVE ONLY
TRANSMIT ONLY
Press [ENTER]
M&C MODULE FW
(Status Only)
FW/NNNNNN-DDR
MM/DD/YY
FPGA FIRMWARE
(Status Only)
FW/NNNNNN-DDR
FPGA FIRMWARE
MM/DD/YY
DSP FIRMWARE
(Status Only)
FW/NNNNN-DDR
DSP FERMWARE
MM/DD/YY
MASTER RESET
ACCESS TO
SUBMENU
CONDITIONAL OR
OPTION-DEPENDENT
Parameter Information
Key:
DISPLAY CONTRAST
LEVEL: X
X = 0 to
HARD/SOFT
Initiating a hard reset resets
modem and places the default
configuration settings in the
memory. Initiating a soft reset
will reset the modem
but saves the current firmware
configuration settings.
Figure 3-14. Utility System (SDM-100 Operation)