Comtech EF Data SDM-100A - Manual (Page 56)

Operation SDM-100A Satellite Modem
3–22 Rev. 0
SDM-100 "TYPE"
VER: 14.7.4
FUNCTION SELECT
CONFIGURATION
CONFIGURATION
LOCAL AUPC
(AUPC only)
AUPC ENABLE NOMINAL POWER MINIMUM POWER MAXIMUM POWER
TARGET NOISE TRACKING RATE LOCAL CL ACTION
ON/OFF -30 to -5 dBm -30 to -5 dBm -30 to -5 dBm
3.2 to 9.7 dB
in 0.1 dB increments
0.5 to 6.0 dBm per minute
MAXIMUM
NOMINAL
HOLD
If carrier lock is detected
REMOTE CL
ACTION
MAXIMUM
NOMINAL
HOLD
If carrier lock is detected
ACCESS TO
SUBMENU
CONDITIONAL OR
OPTION-DEPENDENT
Parameter Information
Key:
Figure 3-6. Configuration Local AUPC (SDM-100 Operation)