Comtech EF Data SDM-100A - Manual (Page 41)

SDM-100A Satellite Modem Operation
Rev. 0 3–7
3.2.1.1 Configuration
Modem configuration may be viewed or changed by entering the “CONFIGURATION”
level from the “FUNCTION SELECT” menu on the front panel.
After entering the “CONFIGURATION” menu, press [
← ] or [ → ] to select
“MODULATOR,” “DEMODULATOR,” “INTERFACE,” or “LOCAL AUPC” (if that
option is installed).
Enter the selected configuration menu by pressing [ENTER].
Press [
← ] or [ → ] to view the selected configuration parameters.
To change a configuration parameter, press [ENTER] to begin the change process. Press
[
↑
] or [
↓
] to make the changes.
After the changes are made and the display represents the correct parameters, execute the
changes by pressing [ENTER]. After [ENTER] is pressed, the necessary programming is
initiated by the modem. To undo a parameter change prior to executing it, simply press
[CLEAR].
The modem configuration functions are outlined in the following paragraphs.