Comtech EF Data MiniMac Installation ManualOperation Manual Operation Manual - Manual (Page 93)

MiniMAC Program MiniMAC Rack Management System
3–14 Rev. 0
3.4.2 Check Services after Restart
3.4.2.1 Configure ILCNET
Path: Start\Settings\Control Panel\Services
Notes:
1. Make sure the Loopback adapter is installed from Windows NT.
2. Default setting for ILC Network Manager is: MANUAL and NOT RUNNING.
Command Response
Click on ILC NETWORK MANAGER
Click on STARTUP
Enable AUTOMATIC
Enable THIS ACCOUNT
Verify (or Type) ADMINISTRATOR
Verify Password (or Type) ilc (lower case)
Confirm Password ilc (lower case)
Click on OK