Comtech EF Data MiniMac Installation ManualOperation Manual Operation Manual - Manual (Page 86)

MiniMAC Rack Management System MiniMAC Program
Rev. 0 3–7
3.3.1.3 Enable Ports
Go to PORTS and check mark (
!) all the NO LISTENS
Note: The following is for a system with two boards.
Example : First PC card will be 3 – 10
Second PC card will be 11 – 18
Command Response
Click on OK
Click on OK
Click on OK
Restart Computer
Verify the COMM ports with either:
Hyperterm.Exe
Commtest. Exe
Notes:
1. Commtest.exe will run the communications port just like the MiniMAC program.
2. Hyperterm is located within the Windows NT program.
3. Commtest is located at: C:\Program Files\ILCNCS\Commtest.Exe.