Comtech EF Data MiniMac Installation ManualOperation Manual Operation Manual - Manual (Page 129)

Introduction MiniMAC Rack Management System
1–6 Rev. 0
1.3 Applications
Note: This system can be used in the C-Band or Ku-Band environment.
System navigation and control are accomplished through simple point-and-click options,
allowing intuitive system control. The standard system allows control of 50 to 100
Adaptive Broadband components, ranging from modems to RF terminals. Custom
systems can be configured Using Adaptive Broadband components, allowing for a wide
range of hub configurations (including SCPC star networks).
For star networks applications, MiniMAC can use the Asynchronous Channel Unit
overhead available on Adaptive Broadband modems. This overhead channel allows
MiniMAC to monitor and control remote site equipment in a manner transparent to the
customer data, allowing for continuous communications between MiniMAC and the
remote sites.
Refer to (Table 1-2) for Adaptive Broadband components that can be monitored and
controlled when used in conjunction with the MiniMAC system.
Table 1-2. Adaptive Broadband Components
Modem Converters Switches Terminals
SDM-300 SDC-400 RSU-503L RFT-500
SDM-300A SDC-400A RC-1150 RFT-12000
SDM-308-4 SDC-600 SMS-301
SDM-308-5 SDC-600A SCS-500
SDM-309 SDC-1200 SMS-658
SDM-650 SDC-1200A SMS-758
SDM-6000 SDC-1400 SMS-7000
SDM-8000 SDC-1400A
SDM-9000 V2200
1.4 Environmental Specifications
Refer to (Table 1-3) for environment specifications.
Table 1-3. Environment Specifications
Parameter Specification
Temperature 5 to 35
°
C (41 to 95
°
F)
Humidity 0 to 80%, noncondensing