Comtech EF Data MiniMac Installation ManualOperation Manual Operation Manual - Manual (Page 128)

MiniMAC Rack Management System Introduction
Rev. 0 1–5
1.2 Description
1.2.1 Overview Window
The overview window supplies information for all configured racks.
•
Green – Normal operation (when configured equipment is in normal operation.)
•
Red or Yellow – Alarm or Fault (the operator is alerted of transmit, receive, and
switch alarms by the alarm or fault.)
•
Orange – if communication to a device is lost.
1.2.2 Equipment Screen Window
The equipment screen window provides a graphical representation of the equipment, with
all LEDs and indicators being completely functional.
The detail of every event is available, as well as isolating specific equipment events. The
equipment screen window allows the operator to view the same details of control status
and configurations that are available from the front panel of the equipment.
1.2.3 Data and Report Generation
System data can be sorted and printed as a report or displayed on the monitor. The data
log is maintained on the following items:
•
Time of log entry
•
Faults and alarms
•
Equipment Commands
•
Equipment index number (location)
•
Detected changes in configuration and status
•
System events